Sliding Blade Picket Batten Sliding Gate Hardware & Roller Kit with Z Channel - Cladded Façade - 7m Roller track
- Availability: In Stock
- Brand: Direct Import
- Product Code: Aluminium Screening
- $420.00
This style suits our Blade, Batten, Picket & Spear Top Sliding Gates
- Heavy Duty Gate Receiver when gate is in closed position at top of gate
- 2 x Wheels that you cut into the bottom frame
- 1 x Gate Stopper when gate is in open position at tail
- 7m of Galvanized Steel roller track ($20 per metre for extra roller)
- Nylon Block C-Channel in Black or White and 300mm long and 85mm wide
- Nylon Block
- Up to 7m x Z-Channel
- Includes screws and plugs as required for roller track
Roller Height: With the wheels and track, the gate will sit 70mm off the concrete to the underside of the gate
Note: You have to install a rear post to hold the Nylon Block C-Channel and most times there is a post 3/4 way to all the way to top height of the gate but needs to match up to where you install the Z-Channel. Your rear post should sit out around 80mm from the rear of gate. Either install a Full post or DIY a U bracket (See images)
You need to screw the Z-track into the back of your gate. If you have a centre Horizontal frame or similar that would be the place to install. If you youll need to attach at the top of the frame The Z-Track is what holds the gate upright while it rolls to the closed position. There are no top rollers on this style of Roller kit
The Z-Track fits inside the Nylon Block
The Nylon block slides inside the C-Channel and moves freely up and down as your gate opens and closes and bumps and wobbles etc
The Price includes any freight when buying one of our sliding gates at the same time.
CONTACT, RETURN AND REFUNDS