Picket Sliding Gates 65 or 100 mm Slats - White or Black or Dark Grey Pickets Custom Cut
- Availability: In Stock
- Product Code: Aluminium Screening
Tags: Picket Sliders
- $301.00
100mm or 65mm PICKET SLIDING GATES
CUSTOM SIZES TO SUIT ANY JOB
THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL
USING OUR EXCLUSIVE DIY CONCEALED FASTENER SYSTEM
How to Get Fast Prices
- SMS me your size to 0414237573
- Tell me what height and width YOU need the gate frame (normally a max width span is 5000mm, but we do plenty up to 8m)
- Tell me colour of pickets, either White or Black or Dark Grey
- Tell me the gaps between pickets. You can choose your gaps.
For example a typical 5000 wide x 1200 high picket slider with 60mm gaps and built Vertical slats and in Black, White or Dark grey would be $1805. That works out at $301 per SQM. This is a Cut to Size then flat packed as a DIY kit
The multi-purpose top and bottom rail that we have developed have holes pre-punched every 40mm to give you a prefect vertical picket facade system that you can do DIY in any width or height that your job requires.
There are 2 horizontal rails per panel and allow the screws to sit inside then an aluminum cover conceals all the fixings for a great looking finish.
The gate frame is made 50x50mm Box that screw together with internal brackets and braces
Total depth of gate will be 66mm.
Select your between each picket gap to get an accurate quote. Obviously the closer the pickets, the more privacy but also the more aluminum is used so higher the price
The slat pickets are 100mm 16mm or 65mm x 16mm. The screw connection system is super strong with our internal ribs inside the pickets, the extrusion is connected using the included 4 x internal fasteners each picket.
The slats and rails come in 3 colours; Satin Black, Dark Grey or Gloss White.
The VERTICAL SLAT and HORIZONTAL RAIL & Frame COLOURS ARE
Dark Grey - Flat
Satin Black
Gloss White
We carry 76x76mm or 100x100 Aluminium Posts here.
DIY System
- The only supplier of DIY aluminum pickets in Australia with 2 internal ribs for strength and screw connection
- Powder Coated in 3 colour
- TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
- 3 Slat Colours to choose from: White, Black & Dark Grey
- Usually you fit you bottom and top rail around 10% of the overall slat length
- Fully concealed rear fixings
- Caps for the top and bottom of each pickets; Either black or white plastic caps
- Plugs provided for excess holes in horizontal rail. Half of our customers do not use them. Either black or white
- If wide than 5000mm then you will get 2 piece horizontal rails
WE ALSO MAKE GATES and FENCES TO MATCH- WE CUT, YOU TEK IT AT HOME
BULKY GOODS
DELIVERY
- If only buying 1 x gate
or 1 x panel then Australia wide wrapping and shipping is =$120.
- If buying more, then see
the flat rate shipping Info below:
-$140 flat rate fee to the
Northside of Brisbane
-$200 flat rate fee to the
Southside of Brisbane
-$250 flat rate fee to the
Gold Coast, Ipswich or Sunshine Coast
-$350 flat rate fee to
Sydney or Rockhampton
-$450 flat rate fee to
Melbourne or Townsville
**We use backload trucks
for most of the above and usually do all drops in other country towns we pass
but following that main highway. Sometimes these deliveries will be after
hours
-All other areas we can quote to a home in your state or country town