MODERN ARCHITECTURAL FENCING USING 3 DIFFFERENT PROFILES

CUSTOM SIZES TO SUIT ANY JOBS - YOU provide the WIDTH and height for each panel

 Direct from the Warehouse

10 Richards Rd Narangba 4504

(Across the highway from Costco)

THIS IS A DIY PRODUCT AND YOU FIT & INSTALL

USING OUR EXCLUSIVE DIY FIN BLADE SYSTEM

How to Get Fast Prices

- SMS me your panel sizes to 0414237573

- Tell me what height and width between posts.  Keep panels under 2700mm.  If wider add a 76mm post and divide the panels.

- Tell me colour of slats 

- Tell me what gap you need between each batten

HEY, DO NOT PROVIDE YOUR FRONTAGE.  WE ARE DIY PANEL BUILDERS AND ONLY CHARGE AN ALLOY RATE, SO YOU DO YOURSELF A PERSONAL DRAWING AND ONLY SEND ME EACH PANEL SIZE UNDER 2700MM WIDTH

For example a typical 2200 wide x 1600 high screen or fence with 30mm gaps and built Vertical slats and in Black, white or Dark grey would be $590  That works out at $253 per SQM. This is a Cut to Size then flat packed as a DIY kit.  If you used a 65mm gap then this same panel would cost only $188 per square metre

Honestly this is a premium fence for families whose budget are high-end.  My aluminum rates are the same for anything I build, it is just this panel takes a LOT of aluminum.  We do not fabricate but the 3 quotes we saw from others, my prices are around 65% cheaper then other Brisbane suppliers who supply you fully made panels ion this style.  So heaps of savings using us, but more labour needed at your end.

The multi-purpose  top and bottom rail that we have developed have holes pre-punched every 40mm.  Around 70% of the vertical battens will use these screw holes.  Some you will TEK your own hole and most you will use 2 screws per vertical batten anyway.  We will even cut 2 spacers to allow you to get your gaps between extrusion exact. Excess holes we give you plugs to fill them.

When asking for a quote you decide what gap you want BETWEEN each vertical extrusion. Obviously the closer the vertical the more privacy but also the more aluminum is used so the higher the price:

This combo fence panel will be supplied a random number of these extrusions:

- 65mm Wide slats

- 40x40mm battens

- 16mm wide blades

The screw connection system for blades and battens is super strong with our internal ribs inside the blades and the extrusion has been tested and when fitted is as strong as welding.

The facade extrusions and rails come in 3 colours; Satin Black, Dark Grey or Gloss White.

The VERTICAL SLAT and HORIZONTAL RAIL COLOURS ARE

Dark Grey - Flat

Satin Black

Gloss White

You can build your fences or screens between Aluminium posts or your own brick piers or other post material like timber or steel. 

We carry 76x76mm or 100x100 Aluminium Posts here.

DIY System

• Strongest blade slats in Australia with 2 internal ribs for strength and screw connection
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 3 Slat Colours to choose from: White, Black & Dark Grey
• Usually you fit you bottom and top rail around 10% of the overall slat length
• Full concealed fixings
• Caps for the top and bottom of each extrusion; Either black or white plastic caps
• Plugs provided for excess holes in horizontal rail.  Half of our customers do not use them. Either black or white

SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock

• Connect the top and bottom 40x40 rail with the 2 brackets to the internal centre or edge of your post or pier on both sides.  
• Decide where the rail will screw to blades.  Typical way to decide is use 10% of the slat length.  Then use that as the intersection for the top and bottom rail to the slats.  So if slats are 1200mm long then use 120mm from top of slat to the rail and also 120mm from bottom of slat to the rail.
• Using a tape, measure down each slat edge from the top with a bright marker
• Using 2 people screw the first extrusion to the edge of the first GAP we have nominated on the cutting sheets. Then every extrusion after that use the GAP you chose when we quote
• Continue the entire rail with top screws.  Use the 2nd person to hold slat firm to rail.
• Once completed screw in the bottom.  Normally no measurement is required for the bottom as the bottom rail should be firm and square
• Leave your gap between slats as shown on speed sheet.
• If you need posts then 76x76m Posts are $40 per metre or 100x100 are $70 per metre

WE ALSO MAKE SLIDING & SWING GATES TO MATCH- WE CUT, YOU TEK IT AT HOME

What you should know:

- Payment of $100 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow 3-6mm difference in final sizes

- When we quote you slat gaps (24mm or 64mm or 104mm) this will be the gap between the slats.  The slat and gap may not divide equally into your width so we will advise what that gap is when we give you the installation instructions. Or ask us prior to the order. Slats cant go within 30mm of the start and finish as the bracket holding the rail is there

BULKY GOODS DELIVERY

- If only buying 1 x gate or 1 x panel then Australia wide wrapping and shipping is =$120.  

- If buying more, then see the flat rate shipping Info below:

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for most of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a home in your state or country town