Spike Top Security Gates - Custom Sizes - Double Swing 3400 wide Example
- Availability: In Stock
- Product Code: Aluminium Screening
- $1,084.00
HEAVY DUTY SECURITY BAR SWING GATES TO MATCH OUR FENCING
CUSTOM SIZES TO SUIT MOST JOBS AND SUPPLIED DIY IN
3 COLOURS
EXCLUSIVE SUPPLIER
Direct from the Warehouse
10 Richards Rd Narangba 4504
(Across the highway from Costco)
THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL
USING OUR EXCLUSIVE PUNCHED RAIL SYSTEM
How to Get Fast Prices
- SMS me your Gate Frame size to 0414237573
- Tell me what height and width of each gate (if double swing then provide sizes of the 2 x sides)
- Tell me colour of security bars (black or dark grey or white)
- Tell me if you want a spike top or a capped square bar top
- If using my pivot hinges take off 25mm gap and also most locks take of 10mm gaps.
For example a typical 3400 wide x 1800 high spike top security "DOUBLE SWING" gate with the 95mm gaps and built Vertical bars and in Black, white or Dark grey would be $1084. That works out at $177 per SQM. This is a Cut to Size then flat packed as a DIY kit
The multi-purpose top and bottom rail that we have developed have holes pre-punched every 95mm to give you a prefect vertical fence system that you can do DIY in any width or height that your job requires. The 2 rails screws to the bars and fully concealed behind a locked in alloy cover. Security strong and no screws showing with a great looking finish.
The gate frames are 3 sided and made from 50x50 box with integrated fittings. The security panel cleverly connects inside this frame. Made to suit using our 180-degree Pivot Hinges and any of my locks or latches at an extra charge.
The security bars are 25mm x 25mm and 1.2mm thick powder coated aluminum. The horizontal rails can be mounted anywhere you like on the bars to allow attaching to your frame easy.
The bars and rails come in 3 colours; Satin Black, Dark Grey or Gloss White.
The SECURITY BARS and HORIZONTAL RAIL COLOURS ARE
Dark Grey - Flat
Satin Black
Gloss White
We carry 76x76mm or 100x100 Aluminium Posts here.
DIY System
- Most convenient custom security fence system in Australia with 2 part rail system we designed for strength and screw connection security
- Powder Coated
- TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
- 3 bar Colours to choose from: White, Black & Dark Grey
- Usually you fit your bottom and top rail around 15% of the overall slat length
- Fully concealed internal bar fixings with hidden stainless screws
- Spikes for the top of each bar (flat cap option also available)
- MATCHING Powdercoated screws for the frame
SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock
- You need to build the internal gate panel independently on a bench or the ground first
- Decide where the rail will screw to bars. Typical way to decide is use 15% of the bar length. Then use that as the intersection for the top and bottom rail to the slats. So if bars are 2000mm long then use 300mm from top of bar to the rail and also 300 mm from bottom of slat to the rail. If you have a 3rd horizonal it usually goes 10% of bar down from top rail.
- There are 2 horizonal rails for each rail. The one with the perfect fitting square is the top cover and the one with the screw holes and elongated holes is the bottom. All 6 pieces need to have the bars slide through at the start
- Drop the bars in from the top so it goes through each hole then Tek with the special SILVER hex screw.
- Using a tape, measure down each bar from the top so they all line up before screwing. Screw tops only.
- Once it is done screw also from the other side.
- Once completed screw in the bottom. Normally no measurement is required for the bottom as the bottom rail should be firm and square.
- It will still move a little. If your using for a rake then you may have needed to have lined up with rake before screwing tight.
- Build the 50x50 box gate frame using the concealed fittings using our instruction sheet.
- Fit the security panel into the frame by connecting the 2 Horizontal 40x40 rails with their 2 brackets to the internal centre on both sides.
- Check level before screwing the bracket to the rails.
- If you need posts then 76x76m Posts are $40 per metre or 100x100 are $70 per metre
WE ALSO MAKE SLIDING GATES AND FENCE TO MATCH- WE CUT, YOU TEK IT AT HOME
- Allow 3-6mm difference in final sizes
BULKY GOODS
DELIVERY
- If only buying 1 x gate
or 1 x panel then Australia wide wrapping and shipping is =$120.
- If buying more, then see
the flat rate shipping Info below:
-$140 flat rate fee to the
Northside of Brisbane
-$200 flat rate fee to the
Southside of Brisbane
-$250 flat rate fee to the
Gold Coast, Ipswich or Sunshine Coast
-$350 flat rate fee to
Sydney or Rockhampton
-$450 flat rate fee to
Melbourne or Townsville
**We use backload trucks
for most of the above and usually do all drops in other country towns we pass
but following that main highway. Sometimes these deliveries will be after
hours
-All
other areas we can quote to a home in your state or country town
Great for Industrial warehouses, front fences, schools or for energy groups and railway corporations.
