HEAVY DUTY SECURITY BAR SLIDING GATES TO MATCH OUR DIY FENCING

CUSTOM SIZES TO SUIT ANY JOBS AND SUPPLIED DIY

3 COLOURS - EXCLUSIVE MANUFACTURER

THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL

USING OUR EXCLUSIVE PUNCHED RAIL SYSTEM

How to Get Fast Prices

- SMS me your Gate Frame size to 0414237573

- Tell me what height and width you need it made to (If your having it slide past your posts then add extra for the for the rollers and catcher to receive it)

- Tell me colour of slats (black or dark grey or white)

- Tell me if you want a spike top or a capped bar top

For example a typical 4800 wide x 1800 high spike top security sliding gate with the 95mm gaps and built Vertical bars and in Black, white or Dark grey would be $1012.  That works out at $117 per SQM. This is a Cut to Size then flat packed as a DIY kit

The multi-purpose  top and bottom rail that we have developed have holes pre-punched every 95mm to give you a prefect vertical fence system that you can do DIY in any width or height that your job requires.  The 2 rails screws to the bars and fully concealed behind a locked in alloy cover.  Security strong and no screws showing with a great looking finish. If the gate is higher than 1800mm we will supply 3 x Horizontal rails.

The gate frames are 3 sided and made from 50x50 box with integrated fittings. The security panel cleverly connects inside this frame.

The security bars are 25mm x 25mm and 1.2mm thick powder coated aluminum.  The horizontal rails can be mounted anywhere you like on the bars to allow attaching to your frame easy.

The bars and rails come in 3 colours; Satin Black, Dark Grey or Gloss White.

The SECURITY BARS and HORIZONTAL RAIL COLOURS ARE

Dark Grey - Flat

Satin Black

Gloss White

We carry 76x76mm or 100x100 Aluminium Posts here.

DIY System

• Most convenient custom security fence system in Australia with 2 part rail system we designed for strength and screw connection security
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 3 bar Colours to choose from: White, Black & Dark Grey
• Usually you fit your bottom and top rail around 15% of the overall slat length
• Fully concealed internal bar fixings with hidden stainless screws
• Spikes for the top of each bar (flat cap option also available)
• MATCHING Powder coated screws for the frame

SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock

• You need to build the internal sliding gate panel independently on a bench or the ground first
• Decide where the rail will screw to bars.  Typical way to decide is use 15% of the bar length.  Then use that as the intersection for the top and bottom rail to the slats.  So if bars are 2000mm long then use 300mm from top of bar to the rail and also 300 mm from bottom of slat to the rail. If you have a 3rd horizonal it usually goes 10% of bar down from top rail.
• There are 2 horizonal parts for each rail.  The one with the perfect fitting square is the top cover and the one with the screw holes and elongated holes is the bottom.  All horizontal pieces need to have the bars slide through at the start
• Drop the bars in from the top so it goes through each hole then Tek with the special SILVER hex screw.
• Using a tape, measure down each bar from the top so they all line up before screwing.  Screw tops only.
• Once it is done screw also from the other side.
• Once completed screw in the bottom.  Normally no measurement is required for the bottom as the bottom rail should be firm and square.
• It will still move a little.  If your using for a rake then you may have needed to have lined up with rake before screwing tight.
• Flip over and also screw from the back
• Build the 50x50 box gate frame using the concealed fittings using our instruction sheet.
• Fit the security panel into the frame by connecting the 2 or 3 Horizontal 40x40 rails with their 2 brackets to the internal centre on both sides.  
• Check level before screwing the bracket to the rails.
• If you need posts then 76x76m Posts are $40 per metre or 100x100 are $70 per metre

WE ALSO MAKE SWING GATES AND FENCE TO MATCH- WE CUT, YOU TEK IT AT HOME

What you should know:

- Payment of $250 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Allow 3-6mm difference in final sizes

- When we quote you bar gaps are fixed at 95mm.  The bar and gap may not divide equally into your width so the first and last gap WILL BE DIFFERENT to the 95mm.  We will advise what the first and last gap is when we give you the installation instructions. Or ask us prior to the order. Bars cant go within 30mm of the start and finish of the panel as the bracket holding the rail is there

BULKY GOODS DELIVERY

- If only buying 1 x gate or 1 x panel then Australia wide wrapping and shipping is =$120.  

- If buying more, then see the flat rate shipping Info below:

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for most of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a home in your state or country town

Great for Industrial warehouses, front fences, schools or for energy groups and railway corporations.

 Direct from the Warehouse

10 Richards Rd Narangba 4504

(Across the highway from Costco)