White Heavy DutySliding Gates with TOP BATTENS

Made to measure custom sizes then you DIY

We use white aluminium slats connected to channels with a 0mm, 10mm, 16mm, 40mm or 80mm gap between the vertical Slats at bottom.

The 38mm battens on top are spaced between 45 & 165mm apart

The listed price is an estimate of vertical sliding gates in Gloss white with 80mm gaps between slats and per Square Metre with an 80mm x 50mm top and bottom Rail. Supplied cut to size then you DIY

Posts are extra and available in 6 colours in 76x76mm if needed.

• Custom sliding in vertical slats around $260 per sqm, cut to size but DIY
• The custom panels uses a Top and Bottom Rail made from 80 x 50mm (it is a combination of an 50 and 30mm channels put together.
• Mid Rail is 110x50mm
• All the screws that lock in the slats are screwed behind a concealed proprietary channel that looks sleek and a beautiful finish.
• There will always be variable gaps between the first and last slat as most times the width you have wont divide equally between the slats and the set gaps.
• Manual roller kits in white from $300!

To order you only need to provide the the width you need the sliding gate frame.

Then pick them up and assemble and install