We cut to size your Sliding Gate - You assemble and Install

DIY

- SMS me your size to 0414237573

- Tell me what height and width

- Tell me colour of slats 

- Tell me if you want black, Merbau, Dark Grey or white gate frames

- Tell me if you want 0mm or 10mm or 16mm or 40mm gaps between the slats

For example a typical 1600mm tall and 4500mm wide gate and supplied in DIY form (which still needs assembly by you) and 16mm gaps would cost around $1570 which is around $225 per SQM. 

If you want us to assemble then supply and build is $250 extra.  We do not install at your location and the pickup is from Narangba. (e.g. price above is for 16mm gaps and black slats)

This is to suit traditional horizontal slats. See other listing for vertical slats

If your BUY my manual roller kit the height of the wheels and track,  is 70mm off the concrete to the underside of the gate so allow for that when determining your gate height.

What you should know:

- Payment of $250 needs to be made for any custom orders of sliding gates

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow + or - 10mm difference in final size

- When we quote you slat gaps (0mm or 10mm or 16mm or 40mm) this will be the gap between the slats.  The gap between the top slat and bottom slat on the frame will NOT be equal. 

This is because we do not cut (or rip) slats long ways.  So if you want the same gap all the way through your gate then ask us for a height closest to your needs that divides equal.

- If you buy DIY the tools you would need to build the gate would be a Tek drill, tape measure and a Square.

 

Gate outside frame material is available in:

- Satin Black frame

- Gloss White frame

- Dark grey frame

- Merbau frame

Slat Colours

- Satin Black frame

- Gloss White frame

- Dark grey

- Merbau

- Red Cedar

- Teak

When cut allow a -10 to +10 tolerance for the size you ask. 

* Slider gates we add a 400mm motor tail to the gate to allow you to connect to your sliding gate motor.

* For Sliding gates longer than 4.9m there may be a breaker in the middle that join the slats.

We don't supply any motors but we can sell a manual heavy duty kit with a main U-Post and wheels and stoppers and rollers and track for $400 extra. We also have an economical hand manual roller kit for $180. (see other listings for the images)

ANY HEIGHT CAN BE MADE - WE CUSTOM MAKE ALL OUR SLAT GATES AND PROVIDE EITHER FULL MADE OR DIY

Further Information on Installation

* You need to have DIY experience

* Price does not come with any posts - buying the extra roller kit will get you the U-Post and all parts needed to slide.  You still need an end post.

* Heavy Duty alloy 76mm x 76mm posts are available from our warehouse at $40lm or 100x100mm are $70lm

* If buying our 76x76mm posts for the closed Post, the one when the gate receiver goes on then it is $40LM

* Instructions are provided 

* Each install and each home is different.  You may need extra hardware or less hardware.

*At least 2 people needed to install

 

These tough surface finishes are guaranteed for ten years – Our aluminium gates require virtually no maintenance.

A periodic wipe down keeps them looking as good as new – Aluminium gates don’t rot, warp, crack, dry out or soak up water.

 The physical changes that stop wooden gates opening and closing properly don’t affect aluminium – Aluminium gates are perfect for automation.

They are strong yet light and do not expand and contract like wood – And now you can have your own, low maintenance, long lasting, beautiful aluminium gates without breaking the bank. 

Lightweight and robust - Our high quality aluminium gates offer a no maintenance alternative to traditional wood and steel counterparts, aluminium will not be affected by the changing weather conditions

Powder Coated Finish - Offers extra protection that will keep the gates looking like new for years to come.

 

Whether you want to automate your gates or operate them manually, our aluminium sliding security gates can be used for both options.

(We do not supply automation but there a dozens of supplier online)

 

So you will have NO RUST and the surface stays is POWDER COATED to last a decade

  

Note

We supply gates only.  We do not do measure and quotes or installs.

 

Delivery and Pickup

FREE pickup from Narangba Warehouse. Usually need 2 hours’ notice to pick order

$100 Northside Brisbane delivery

$160 Southside Brisbane Delivery

$200 Sunshine or Gold Coast Delivery

$250 Flat Rate Sydney

$350 Flat Rate Melbourne