Picket Fencing 100 mm Slats - White or Black or Dark Grey Pickets Custom Size
- Availability: In Stock
- Product Code: Aluminium Screening
- $142.00
100mm ALUMINIUM PICKET FENCING
CUSTOM CUT TO SIZE • DIY FLAT PACK SYSTEM
DIRECT FROM THE NARANGBA FACTORY
MODERN ALUMINIUM PICKET FENCING MADE EASY
Create a clean, modern vertical picket fence using our exclusive DIY concealed fastener system.
Every panel is custom cut to your required size, then supplied flat packed ready for you to assemble and install.
HOW TO GET A FAST PRICE
1. SMS your individual panel sizes to 0414 237 573 – not your total frontage
2. Tell us the width and height required between your posts
3. Choose your aluminium picket colour
4. Choose approximately 20mm, 60mm or 100mm gaps between the pickets
5. For areas wider than 3000mm, provide the individual panel widths between each post
2. Tell us the width and height required between your posts
3. Choose your aluminium picket colour
4. Choose approximately 20mm, 60mm or 100mm gaps between the pickets
5. For areas wider than 3000mm, provide the individual panel widths between each post
EXAMPLE PRICE
A typical 2200mm wide x 1200mm high vertical picket fence with approximately 100mm gaps would be around $374, depending on colour and final specifications.
That works out at approximately $142 per SQM.
We cut everything to size and flat pack the components as a DIY kit for you to assemble and install.
That works out at approximately $142 per SQM.
We cut everything to size and flat pack the components as a DIY kit for you to assemble and install.
HOW OUR DIY PICKET SYSTEM WORKS
Our specially developed top and bottom rails have holes pre-punched every 40mm. This creates a simple vertical aluminium picket system that can be custom made to suit almost any fence width or height.
Each panel uses 2 horizontal rails. The screws sit inside the rails and fasten directly into the reinforcing ribs inside each aluminium picket.
Once assembled, an aluminium cover fits over the rail to completely conceal the screw fixings.
The result is a clean, modern fence with no rows of exposed screws across the front.
Each panel uses 2 horizontal rails. The screws sit inside the rails and fasten directly into the reinforcing ribs inside each aluminium picket.
Once assembled, an aluminium cover fits over the rail to completely conceal the screw fixings.
The result is a clean, modern fence with no rows of exposed screws across the front.
100 x 16mm ALUMINIUM PICKETS
Our vertical aluminium pickets are 100mm wide x 16mm deep and feature 2 internal reinforcing ribs.
These internal ribs add strength to the picket while also providing a solid fixing point for the screws connecting each picket to the horizontal rails.
Being aluminium means NO RUSTING, excellent durability and very little ongoing maintenance.
These internal ribs add strength to the picket while also providing a solid fixing point for the screws connecting each picket to the horizontal rails.
Being aluminium means NO RUSTING, excellent durability and very little ongoing maintenance.
CHOOSE YOUR GAP BETWEEN PICKETS
You choose the spacing between each 100mm picket. Smaller gaps provide greater privacy but require more aluminium, so pricing will increase accordingly.
```
Because every panel is custom cut, the final gap may vary slightly so the pickets can be evenly spaced across the finished panel. We provide the correct spacing information with your DIY kit. ```
Approximately 20mm gaps – greater privacy
Approximately 60mm gaps – modern open-picket appearance
Approximately 100mm gaps – wider open-picket appearance
Approximately 60mm gaps – modern open-picket appearance
Approximately 100mm gaps – wider open-picket appearance
Because every panel is custom cut, the final gap may vary slightly so the pickets can be evenly spaced across the finished panel. We provide the correct spacing information with your DIY kit. ```
8 ALUMINIUM PICKET COLOURS AVAILABLE
Satin Black
Gloss White
Dark Grey – Monument
Light Grey – Shale Grey
Paperbark Cream
Deep Ocean Blue
Merbau
Red Cedar
Gloss White
Dark Grey – Monument
Light Grey – Shale Grey
Paperbark Cream
Deep Ocean Blue
Merbau
Red Cedar
3 REAR HORIZONTAL RAIL COLOURS AVAILABLE
Satin Black
Gloss White
Dark Grey – Monument
Gloss White
Dark Grey – Monument
IMPORTANT – PICKET END CAPS
```
Although the aluminium pickets are available in 8 colours, the plastic end caps fitted to the top and bottom of each picket are only available in:
BLACK | WHITE | DARK GREY
If you select Light Grey, Paperbark Cream, Deep Ocean Blue, Merbau or Red Cedar pickets, simply choose the Black, White or Dark Grey end cap that best suits your project.
If you do not advise an end cap colour, Black will be supplied.
```
If you do not advise an end cap colour, Black will be supplied.
BUILD BETWEEN POSTS, WALLS OR BRICK PIERS
Our fencing can be installed between our aluminium posts or your own suitable brick piers, timber posts, steel posts or existing structures.
76 x 76mm Aluminium Posts =$40 per metre and you advise the length.
100 x 100mm Aluminium Posts =$70 per metre and you advise the length.
Post caps are FREE.
Post bases =$35 each.
76 x 76mm Aluminium Posts =$40 per metre and you advise the length.
100 x 100mm Aluminium Posts =$70 per metre and you advise the length.
Post caps are FREE.
Post bases =$35 each.
WHAT'S INCLUDED IN OUR DIY SYSTEM
✓ 100 x 16mm aluminium pickets
✓ 2 internal reinforcing ribs inside each picket
✓ Quality powder-coated aluminium
✓ No rusting – strong – low maintenance
✓ Fully concealed screw fixing system
✓ Pre-punched horizontal rails
✓ Aluminium rail covers to conceal the screws
✓ Top and bottom plastic picket caps
✓ Plugs for unused rail holes where required
✓ Custom cut to your required sizes
✓ Flat packed ready for DIY assembly
✓ Direct from the Narangba Factory
✓ 2 internal reinforcing ribs inside each picket
✓ Quality powder-coated aluminium
✓ No rusting – strong – low maintenance
✓ Fully concealed screw fixing system
✓ Pre-punched horizontal rails
✓ Aluminium rail covers to conceal the screws
✓ Top and bottom plastic picket caps
✓ Plugs for unused rail holes where required
✓ Custom cut to your required sizes
✓ Flat packed ready for DIY assembly
✓ Direct from the Narangba Factory
SIMPLE DIY INSTALLATION
1. Connect the top and bottom 40 x 40mm rails to your posts or piers using the supplied brackets.
2. Use the spacing sheet supplied with your order to determine which pre-punched hole your first picket starts from. It may not be the first visible hole.
3. Position the horizontal rails on the pickets. A typical position is approximately 10% of the picket height from the top and bottom.
4. For example, with a 1200mm high picket, the rails would normally sit approximately 120mm from the top and 120mm from the bottom.
5. Measure and mark the pickets to ensure both horizontal rails remain straight and level.
6. Screw through the pre-punched rail hole into the internal reinforcing rib of the aluminium picket. Then install the second connection screw through the rail channel for additional connection.
7. Continue installing the remaining pickets using the spacing information supplied with your order.
8. Once the panel is square and secure, fit the aluminium rail covers to completely conceal the screw fixings.
9. Fit the plastic end caps to the top and bottom of each picket. ```
2. Use the spacing sheet supplied with your order to determine which pre-punched hole your first picket starts from. It may not be the first visible hole.
3. Position the horizontal rails on the pickets. A typical position is approximately 10% of the picket height from the top and bottom.
4. For example, with a 1200mm high picket, the rails would normally sit approximately 120mm from the top and 120mm from the bottom.
5. Measure and mark the pickets to ensure both horizontal rails remain straight and level.
6. Screw through the pre-punched rail hole into the internal reinforcing rib of the aluminium picket. Then install the second connection screw through the rail channel for additional connection.
7. Continue installing the remaining pickets using the spacing information supplied with your order.
8. Once the panel is square and secure, fit the aluminium rail covers to completely conceal the screw fixings.
9. Fit the plastic end caps to the top and bottom of each picket. ```
WE ALSO MAKE MATCHING DIY GATES
```
SINGLE SWING • DOUBLE SWING • SLIDING GATES
We custom cut the gate components to your required size and supply them flat packed. You assemble and install at home.
```
WHAT YOU SHOULD KNOW
• A $100 payment per custom panel is required before cutting for pickup orders.
• Custom aluminium orders are normally cut on Tuesdays and Thursdays – our 48-hour cutting days.
• Protective film may be left on applicable material for you to remove after assembly.
• Allow approximately 3–6mm variation in final custom-cut sizes.
• Your nominated picket gap may vary slightly so the pickets can be evenly spaced across the finished panel.
• Pickets cannot normally start hard against the end of the rail because clearance is required for the rail mounting brackets.
• Custom aluminium orders are normally cut on Tuesdays and Thursdays – our 48-hour cutting days.
• Protective film may be left on applicable material for you to remove after assembly.
• Allow approximately 3–6mm variation in final custom-cut sizes.
• Your nominated picket gap may vary slightly so the pickets can be evenly spaced across the finished panel.
• Pickets cannot normally start hard against the end of the rail because clearance is required for the rail mounting brackets.
CUSTOM CUT • FLAT PACKED • DIY
DIRECT FROM THE NARANGBA FACTORY AND WE SHIP AUSTRALIA-WIDE
SMS 0414 237 573 FOR A FAST QUOTE
