LOUVRE SCREENS and FENCES

 Direct from the Warehouse

10 Richards Rd Narangba 4504

(Across the highway from Costco)

THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL

ALL SLATS HAVE FULLY CONCEALED SCREWS SO IT HAS A SMOOTH LOOK

How to Get Fast Prices

- SMS me your size to 0414237573

- Tell me what height and width

- Tell me colour of slats 

For example a typical 1200 wide x 1270 high louvre screen or fence with 24mm air flow gaps and built Horizontal slats and in Black would be $328.  That works out at $215 per SQM. 

We are DIY only and the pickup is from Narangba.

• The SLAT COLOURS WE STOCK
  

•  Merbau Woodgrain
  

• Dark Grey - Flat

• Satin Black

• Red Cedar Woodgrain

• Gloss White

• Gloss Shale Grey

• Woodgrain Teak Flat

The SIDE RAIL COLOURS WE STOCK

 Gloss White

Satin Black

You can build your louvre screens and fences between Aluminium posts or your own brick piers or other post material like timber or steel. 

We carry 76x76mm or 100x100 Aluminium Posts here.

All our slats are a Heavy Duty 100mm High x 16mm Thick aluminium profile with 2 reinforcing ribs inside. It's powder coated so will give you at least a decade of no paint or maintenance.

Our Louvre slat holders are a rigid extrusion with laser cut slat holes that hold the slats on a fixed angle. The extrusion is 65mm wide (eg the width that goes on your post).

When slats are inserted it leaves a 10mm gap between slats but the airflow gap is 24mm.

So it's a sleek and strong finish where all slats slide into its housing.  The screws are external so when you fit, decide which side will see them.

The slat side holders only come in BLACK & WHITE but the internal slats can be satin black or gloss white or gloss light grey or a flat dark grey. Our 3 Woodgrain slat colours add around 17%.

We cut orders on Tuesdays & Thursdays so get your order in before that & we work till all jobs are out.

Your height won't normally divide equally so there are fixed heights you need to work with.  Eg 1165mm high is fixed but you can go up or down in lots of 105mm to suit your job.

Remember the WIDTH  size you give us, the louvre screen will be cut to that size & we will do the allowances for the side channels. 

We are a small family run Brisbane company but we fill all our orders each cut day and we never leave anyone hanging. Our prices are transparent and the price algorithm we use is a fair price for all for the fast service provide. I can quote in 5 minutes so don't be afraid to ask for new sizes if needed.

My direct mobile is 0414237573 so feel free to switch to sms which can be faster.

If you need posts then it's $40 per metre cut to size. Posts are in Black or White, Dark Grey or Merbau alloy. All 76x76mm strong aluminium posts that are matching colours.

We don't do any  home Installing or site visits at all. We are just DIY.

This means it's all cut to your sizes & all the screws included. We don't provide screws to fit to your structure.

All you need at home is a tek drill and a bit of time.

SUPER EASY DIY

• Strongest slats in Australia with 2 internal ribs for strength
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 7 Slat Colours to choose from: Merbau, Red Cedar, White, Black, Teak, Light Grey & Dark Grey
• 2 Side Channel Colours are White or Black
• This style is a Horizontal configuration
• The air flow gap is 24mm
• Merbau & Red Cedar have the Gloss Woodgrain finish on it
• Teak has a flat finish Woodgrain finish on it
• White and Light Grey are a gloss finish
• Black and Grey are a matt/satin finish

SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock

• Most people will build the louvre screens as panels on the ground before installing. 
• Connect the side rail with a slat by sliding it inside the laser cut holes.  Remove the plastic from slats only for the section that will be inserted
• Insert first slat, get it level & Tec Screw it from the rear, then connect to other side channel and do a measure (screws are free)
• We have allowed a clearance of 4mm overall for the slat.
• Insert next slat, etc. letting the other end hang while lying ti down
• Once done, gently manipulate the other side channel into all the slats (this can be fiddly), then TEC if needed but most won't.
• Insert panel into your space and screw in from behind to keep the screws as invisible as possible
• Place caps on the top and bottom of the side channels

PRICES - Cut to size then you assemble at home

• 1200 wide x 1270 high with 24mm gaps in Black would be $328.  So $215 per SQM

• Posts in Black are $40/lm cut to suit including the post cap

.

WE ALSO MAKE STANDARD FLAT SLAT SCREENS AT AROUND $40 PER SQM CHEAPER

What you should know to place an order:

- Payment of $100 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow 3-6mm difference in final sizes

- To make the height even with the slats side channels a table below gives you more details,  If you don't work to these heights then there will be a gap and holes appearing in channels.

DELIVERY

• Pickup from Narangba

• A bit cheaper for cash

• Deliveries $100 delivery fee by arrangement on the North-side of Brisbane. $160 to the Southside. $200 to Tweed Heads or the Sunshine Coast. $300 flat rate Sydney or $400 flat rate Melbourne.