You have spent all that money doing block work and rendering, do not GO CHEAP on the infill panels.  Our aluminium slat infill panels will show off your new fence and in a very simple DIY kits you complete the project in a few hours

THIS IS A DIY PRODUCT AND EASY TO FIT & INSTALL

ALL SLATS HAVE FULLY CONCEALED SCREWS SO IT HAS A SMOOTH LOOK

How to Get Fast Prices

- SMS me your size to 0414237573

- Tell me what height and width between your posts (usually keep panels under 2800mm)

- Tell me colour of slats 

- Tell me if you want  0mm or 10mm or 16mm or 40mm gaps between the slats

For example a typical 1800 wide x 800 high screen or fence with 16mm gaps and built horizontal slats and in Black would be $266.  That works out at $184 per SQM. We do not install at your location and the pickup is from Narangba.

• The SLAT & Channel COLOURS WE STOCK
   Merbau Woodgrain
  Dark Grey - Flat
  Satin Black
  Red Cedar Woodgrain
  Gloss White
  Gloss Shale Grey
  
• Gloss Cream
• Paperbark

You can build your fences or screens between Aluminium posts or your own brick piers or other post material.  

SUPER EASY DIY

• Strongest slats in Australia with 2 internal ribs for strength
• Powder Coated
• TOP QUALITY ALUMINIUM, NO RUSTING, SUPER STRONG - No paint ever!
• 8 Colours to choose from: Merbau, Red Cedar, White, Black, Paperbark, Light Grey, Cream & Dark Grey
• Can be used in a horizontal or vertical configuration
• We give you free inserts to either allow 0mm, 10mm, 16mm or 40mm gap between slats
• Merbau & Red Cedar have the Gloss Woodgrain finish on it
• White, Cream and Light Grey are a gloss finish
• Black and Grey are a matt/satin finish

SIMPLE TO USE INSTRUCTIONS BELOW – All fittings generally in stock

• Connect an F-Channel to your brickwork on both sides
• Insert first slat, get it level & Tec Screw it through the concealed screw section (screws are free)
• Leave your gap (we provide free 0mm, 10mm, 16mm or 40mm gap inserts)
• Insert next slat, etc.
• Add cover strip over F-Channel to conceal screws (free with F-Channel)
• Add caps to top of F-Channel to dress up (free with F-Channel)
• If span is 1800mm or more we will provide in the kit  between 1 and 3 braces to connect the slats together

PRICES - Cut to size then you assemble at home

• 1800w x 800 high with 16mm gaps, build Horizontal and in Black would be $266.  So $184 per SQM as a guide

..but the above is an example.  We can make any size,  it's all custom and we can get ready twice a week.

WE ALSO MAKE GATES - WE CUT, YOU TEK IT AT HOME

What you should know:

- Payment of $100 needs to be made for any custom orders for each panel

- We cut Tuesdays and Thursday each week so have orders in before that

- Protective sheets will be left on the material for you to remove.

- Allow 1-3mm difference in final size

- When we quote you slat gaps (0mm, 10mm or 16mm or 40mm) this will be the gap between the slats.  The slat and gap may not divide equally into your height so we will advise what that gap is when we give you the installation instructions. 

BULKY GOODS DELIVERY

- If only buying 1 x gate or 1 x panel then Australia wide wrapping and shipping is =$120.  

- If buying more, then see the flat rate shipping Info below:

-$140 flat rate fee to the Northside of Brisbane

-$200 flat rate fee to the Southside of Brisbane

-$250 flat rate fee to the Gold Coast, Ipswich or Sunshine Coast

-$350 flat rate fee to Sydney or Rockhampton

-$450 flat rate fee to Melbourne or Townsville

**We use backload trucks for most of the above and usually do all drops in other country towns we pass but following that main highway.  Sometimes these deliveries will be after hours

-All other areas we can quote to a home in your state or country town

 Direct from the Warehouse

10 Richards Rd Narangba 4504

USES FOR SLATS

• Air Conditioning screens

• Fence inserts

• Fence

• Window screening

• Letterboxes

• Garbage Bin Screens

• Slat Gates

• Privacy Screens

• Decorative Panels

• Carport screening from neighbours

• Colourbond fence height extensions